Scott (DT Swiss) Equalizer 2 Shock Tool

To do a basic service on the Equalizer 2 shock you need at least 3 specialist tools that you cannot purchased anywhere unless you are specialist shock servicing business. The 3 tools you need for basic disassembly are as follows:

1. An inverted slot-head screwdriver - to undo the two small bleed valves
2. A 4 pin spanner - to remove the chamber cap from the (-) negative chamber
3. A 3 pin spanner - to remove the chamber caps from the (+) positive chambers

The service instructions for the Equalizer 2 shock are the same as the Equalizer 3, but the tools are different. If you need tools for the Equalizer 2, use the links below on this page. If you need the tools for the Equalizer 3 go to the bottom of this page.

Please use one of the two blue PayPal links below and I will send you 1 x 4 pin tool and 1 x 3 pin tool. Please include your NAME, ADDRESS and TELEPHONE when you make the transaction.

PayPal Links:

UK mountain bike friends - 1 x 4 pin adapter & 1 x 3 pin adapter for £55.50 inc. P&P

INTERNATIONAL mountain bike friends - 1 x 4 pin adapter & 1 x 3 pin adapter for £60.50 inc. P&P

Please note 1: Please allow between 10-30 days for delivery depending on where you live.

Please note 2: The 3D design files are NOT available for download.

Please note 3: Remember these tools are not made from metal, they are plastic, but they are strong enough to do the job multiple times if they are used in the correct way - DO NOT USE THEM WITH ADJUSTABLE SPANNERS, MONKEY WRENCHES OR RING SPANNERS. ONLY USE THEM WITH RATCHET SOCKETS.

Please note 4: The tools listed on on this page will only work with the Equalizer 2. If you need tools for the Equalizer 3, then go to this page.

Feel free to ask questions or leave a review in the comments box below.

Thanks